firing up at 
 on ,
 Copyright (C) 1990 by Continental Software	 detected
 assumed
 Shelling to front-end
 Returning from front-end shell, errorlevel 
 Operating in local mode
 Incoming call at 
 baud 
 Initialisation failed, exiting
! Modem initialisation failureU
      FOSSIL driver missing
      FOSSIL : 
      Initialising the modem
!      Modem initialise failure (#U
&      Waiting for a call             
none1      Event Approaching, Incoming Calls Disabled
 Executing Event at Errorlevel 
          
      Connected at 
 Baud
      Taking Modem Off-Hook
 Local LogonU
	B	e	
ERROR : Menu "!" missing, returning to Top Menu.
Press [Enter] to continue:
Incorrect, access denied!%Attempted access to passworded menu "
Incorrect, access denied!%Attempted access to passworded menu "
>,02s
Incorrect, access denied!%Attempted access to passworded menu "
Exit to DOS at errorlevel 
GOODBYE
Fatal Error : Top Menu missing! Disconnecting...
	%	*	:	N	S	]	b	
Quiet Mode ON
Quiet Mode OFFU
<MISSING>         
<MISSING> 	FILES.BBS
'Press S to Stop, or P to Pause listing:
Press [Return] to continue:U
File Name      Size        Date%-------------- ----------- --------
S#-------------- ----------- --------
Press [Return] to continue:U
File to move          : 
 not found!
Full destination path : #Can't copy a file on top of itself!
Error opening source file..
Unable to create target file..
Error occurred during copy..
Move description [Y/n]? 	FILES.BBS	FILES.NEW
Unable to open FILES.BBS!U
Press [Enter] to continue:U
System Usage Graph for 
    P         12 01 02 03 04 05 06 07 08 09 10 11 12 01 02 03 04 05 06 07 08 09 10 11.      Midnight                            Noon
Press [Return] to continue:U
2Sorry, but the full screen editor is not installedESorry, the full screen message editor is only available to ANSI users=The full screen message editor will be used to enter messages.The line editor will be used to enter messagesU
4Sorry, ANSI graphics are not available at this speed
ANSI/Colour graphics now active%ANSI/Colour graphics will NOT be used5The full screen message editor has also been disabledU
Page Pausing ON
Page Pausing OFFU
Screen clear codes WILL be sent#Screen clear codes will NOT be sentU
(Choose a user (enter the line number) : 
&Sorry, there isn't anyone on that line
Sorry, but 
 doesn't wish to be disturbed.$Sysop Override : Send anyway [Y/n]? 
Message to 
, maximum 1 line
Aborted.
Processing...
**MESSAGE** from 	 on line 
Sent on-line message to 
 (Line 
SentU
How many lines per screen page (10-66)? *
Please enter a number between 10 and 66.
Screen length changed to 
 lines.U
PASSWORD
Enter your password to use: &
Your password must contain at least 
 characters! Try again..%
Please Re-Enter for verification : .
Passwords do not match! Password unchanged..
Password change successfulU
Please enter your new address (City, State): U
Current Time         : 
Current Date         : 
Connect Time         : 
 minutes
Time Used Today      : 
Time Remaining Today : 
Daily Time Limit     : 
Press [Enter] to continue:
7Enter Username search string or [Enter] for all users: Q
Name                          Location                  LastOn    Calls Ratio
Press [Enter] to continue:U
"Sysop paged (outside paging hours)
NOTAVAIL
0Sorry, but you may only page for a chat between 
 and 
Sysop paged (too many times)
MAXPAGE$Sorry, you may only page for a chat 
 times per call.
Press [Return] to continue:
Sysop Page
[C] To break in for a chat
[A] To terminate the page&Sysop paged (aborted at local console)
PAGEABRT0Sorry, but the sysop is not currently available.
Press [Enter] to continue:
Sysop paged (chatted with user)
PAGED
Sysop paged (no response)U
$User requested to terminate the call
GOODBYEU
DOS shell : U
Data File Not Present
0123456789
Press [Return] to continue:U
	 version 
.?Copyright (C) 1990 by Continental Software, all rights reserved3Compiled under Borland's Turbo Pascal version 5.5
HProtocol Engine by Joaquim Homrighausen used for file transfer protocols
	FOSSIL : 
Press [Return] to continue:U
HotKeys active
HotKeys disabledU
"Enter message area(s) to toggle : U
SDQEWould you like to <S>elect, <D>e-Select all message areas or <Q>uit? 
?Verify that you would like to turn all message areas ON [Y/n]: @Verify that you would like to turn all message areas OFF [Y/n]: U
Callers On-Line to BName                               Line     BaudRate      Location
Press [Return] to continue:U
Todays Callers to EName                Line   BaudRate   LogOn  LogOff   Times  Location
     
Press [Return] to continue:U
File To View : 
#Sorry, couldn't locate that file...
Press [Return] to continue:U
ZIP*Error in archive or unknown archive format
0Enter the File Name of the Archive to examine : 
LZH>Sorry, this function currently supports only ZIP and LZH files
Could not locate that file!
Listing Of Archive 4File Name       Compressed     Uncompressed    Ratio
                
     
Press [Return] to continue:U
	!	>	R	\	d	i	x	
01-01-80
0File Search by Date; Press P to Pause, S to Stop
*Search Config File not installed, aborting	FILES.BBS
)Search Ended, Press [Return] to continue:U
Enter File Name to find : 
0File Search by Name; Press P to Pause, S to Stop
*Search Config File not installed, aborting	FILES.BBS
)Search Ended, Press [Return] to continue:U
"Enter keyword to use for search : 
3File Search by Keyword; Press P to Pause, S to Stop
*Search Config File not installed, aborting	FILES.BBS
)Search Ended, Press [Return] to continue:U
No files to send!JSorry, but the protocol you have selected does not support batch transfers
XFERTIME;Sorry, but this download would exceed your daily time limit
TODAYK+Sorry, but this download would exceed your 
k daily limit
RATIO
:1 ratio limit
RATIOK
Files To Transfer : 
Transfer Size     : 
Transfer Time     : 
 minutes at 
 Baud=Start receiving now, or press <Ctrl-X> several times to abort
Download Progress
Download [
 File(s) sentU
&File to Download (Full Path & Name) : 
No files to send!JSorry, but the protocol you have selected does not support batch transfers
Files To Transfer : 
Transfer Size     : 
Transfer Time     : 
 minutes at 
 Baud=Start receiving now, or press <Ctrl-X> several times to abort
Download Progress
Download [
 File(s) sentU
Sorry, incorrect*! Attempted to access passworded file area
File(s) to Download : 
No files to send!JSorry, but the protocol you have selected does not support batch transfers
XFERTIME;Sorry, but this download would exceed your daily time limit
TODAYK+Sorry, but this download would exceed your 
k daily limit
RATIO
:1 ratio limit
RATIOK
Files To Transfer : 
Transfer Size     : 
Transfer Time     : 
 minutes at 
 Baud=Start receiving now, or press <Ctrl-X> several times to abort
Download Progress
Download [
 File(s) SentU
 Activating External Protocol (Download Mode)
Port 
Baud 
Time 
 Processing External Protocol LogU
Transfer cancelled from console
Timeout, error #
NAK, error #$Receiver didn't acknowledge header..
Receiver didn't request headerU
Ending batch session
Sending file data
Unable to open
File is a device
Transfer cancelled by remote
Disk read error
NAK (	) error #	Timeout (
), error #
Transfer cancelled from console/Waiting for receiver to acknowledge end of file
End of file not acknowledgedU
b$C4 
P%@Fpg`
RwbVr
ftGd$T
uJTZ7j
ld\EL
n6~UNt^
	G	s	
Upload [
Drive Space : 
 bytes
Protocol    : 
/There is not enough free space for your upload!;Start sending now, or press <Ctrl-X> several times to abort
Upload Progress
File to upload : 
 Files Received
You have been granted an extra 
 minute(s):Begin description with a "/" if file is for the sysop only	FILES.BBS
Please describe 
PVTFILES.LOG
File        : 
Date        : 
Uploader    : 
Description : U
	1	n	s	
Activating External Protocol (Upload Mode)
Port 
Baud 
Time 
 Processing External Protocol Log	FILES.BBS
 "Protocol Engine" (PE) 1.05 (TP) 
Protocol :
File     :
Size     :
    Time :
Position :U
&[*] indicates batch transfer available
Protocol [Return to Quit]: 
DNLDHRS
*Sorry, downloads are only allowed between 
 and U
	+	:	G	o	
Fetching filename
Transfer cancelled by remote
Carrier lost
Transfer cancelled from console
Fatal timeout	CRC error
Block number mismatch
Bad block complement
Timeout, error #
Debris, error #U
Transfer cancelled by remote
Carrier Lost
Disk write error	CRC Error
Checksum Error
Block number mismatch
Bad block complement
Transfer cancelled from console
Timeout, error #
Debris, error #
Carrier lost
Transfer completedU
	|(6;
b$C4 
P%@Fpg`
RwbVr
ftGd$T
uJTZ7j
ld\EL
n6~UNt^
	$	N	a	f	x	
Transfer cancelled from console
Header CRC errorU
Header CRC errorU
Header data timeout
File seek errorU
(Transfer aborted due to too many errors.
uM6;E
Resending from 0Waiting for receiver to acknowledge end of file.
Resuming from 
Sending file
Session completed
Synchronizing with receiver
Unable to open 
File is a device, skipped 
Sent 
Receiver requested to skip #Receiver requested to abort sessionU
$ < t
Data CRC error
Long data packet
Data CRC error
Long data packet
Synchronizing with sender
Receiving file
Session completedU
badzfile.$$$'Not enough disk space. Session aborted.
Identical file, skipped 
Duplicate file, renamed to 
Resumed file transfer.
Unable to open  Unable to position file pointer.
Unable to create 
File is a device, skipped U
Unable to write to disk.
	Bad pos: 
Transfer cancelled
Timeout'Nonsense end of file received, ignored.	Received U
 "Protocol Engine" (PE) 1.05 (TP)U
$`<@u	
b$C4 
P%@Fpg`
RwbVr
ftGd$T
uJTZ7j
ld\EL
n6~UNt^
|eLXa
n;iL`
o/hXa
iCn4g
hWo f
n1iFa
#.#G#L#[#t#
$P$g$w$|$
%1%M%p%z%
&-&7&L&`&j&z&
(.)?)I)\)a)f)V*e*j*
*K+Z+_+
,[-n-
/!System contains messages ranging 
.2Enter number of message to delete, [Enter]=Quit : 
There is no message #
 in this area
You cannot delete that message.
Deleting message #	Message #
 deletedU
)     U
Upload
)     
       
1ATATIME7Sorry, you may only log on to one line at any one time!'! Attempted to log on to multiple linesU
NOTFOUND4
Your name was not located in the system User File.
Name Entered : 
Did you enter your name correctly [Y/n]? 
TRASHCAN.CTL6! Name entered is unacceptable, Trashcan message given
TRASHCAN2 Sorry, that name is not acceptable on this system
NEWUSER11
Would you like ANSI colour and graphics [Y/n]? 
Y5Do you want to use the ANSI full-screen editor [Y/n] 'Would you like hot-keyed menus [Y/n] ? 2
How many lines does your display have (10-66) ? 8
Would you like to pause after each screen page [Y/n]? 6
Do you want screen clearing codes to be sent [Y/n]? 4
Where are you calling from (Suburb, City, State)? ,
Please enter your home/voice phone number:/
Please enter your business/data phone number:
PASSWORD
xxx  &
Enter your password to use (minimum 
 chars) : %
Please Re-Enter for verification : %
Passwords do not match! Try again..;
Did you enter all the above information correctly [Y/n]? .Scanning phone numbers, please wait a moment..
PHONENUM.CTLBWARNING: Unacceptable voice phone number entered, notifying sysop.1! Entered an unacceptable Home/Voice phone number?WARNING: Duplicate voice phone number entered, notifying sysop..! Entered the same Home/Voice phone number as 
NEWUSER2
NEWUSERU
DUMMY
TOOSLOW6
Sorry, but you cannot use this system at this speed.
NO300@
Sorry, 300 baud callers are not permitted to call at this time
Please enter your full name: 
And your last name? .You must enter both your first and last names!-
** Sysop Remote Access Has Been Disabled **5! Sysop tried to log-on remotely and was disconnected
Scanning User File ... 
, RA line #
 on-line at 
 baud
Name not in user file!
PRIVATE 
Sorry, this system is private..User disconnected after private system message
 Fast logon in local mode
 on-line locally (fast logon)
Password: 
Incorrect password : 
Incorrect, try again.
Access denied!7! Exceeded maximum password attempts, user disconnected
Completed new-user procedure
LOCKOUTFSorry, but your access to this system has been suspended by the sysop.'User disconnected after lockout message
 Logging user back on-line
Logging 
 back on-line
TIMEWARN
System Event in 	 minutes,%your time limit has been adjusted to 	 minutes.
RESET
WELCOME
WELCOME1
Check for waiting mail [Y/n]? 
System forced a password change
EXPIRED
"Your Current Password Has Expired!
?For security purposes, you are required to change your password
every 
 times you call 
Please enter the new password you wish to use : .
You can't use the same password! Try again..%
You password must contain at least 
 characters2
Please enter your new password to verify      : %
Passwords do not match! Try again..U
	$	*	8	G	
! & 8 = K ^ c m 
!.!8!J!O!X!
"/"4"I"S"\"v"
#.#3#K#a#j#x#
$.$Z$c$q$
 Security Watchdog activated, notifying user..! Watchdog : User notified of password attempt
WATCHDOG.MSG
! Unable to open WATCHDOG.MSG Incorrect password logon attemptU
Security level altered to U
Flag 
 set 
 completed questionnaire at 
 ***U
Questionnaire 
 initiated:
Questionnaire completedU
>	N	S	~	
PWDTRASH.CTLC
Sorry, this password is unacceptable. Please try something else..F
You must select a password that is less similar to your current one!U
Checking your mail-box ... 
(You have no new mail in your mail-box.
You have the following mail :	1 message	 messages
YRSKQMN
Would you like to read this mail now? [Y/n] : 
Yes	Scan mail
QuickScan mail
Killing mail ... 
Marking as received ... 
k<Qu%
 * Origin:
[A]gain, [N]ext, [L]ast, 
[R]eply, [E]nter, 
[D]elete, 
[!*XF], 
D!*XF	[S]top : 
[-] <- Replies -> [+], 
[-] <- Reply, 
Reply -> [+], 
Enclosed
Subject 
 (DELETED)
 (PRIVATE)
 (RECEIVED)
   From : 
     To : 
 (KILL/SENT)
 (SENT)
 (FILE ATTACH)
 (CRASH)
 (REQ RECEIPT)
 (AUDIT REQ)
 (RETURN RECEIPT)
 on (
)	Message #
   Date : 
Replies : 
-> #U
A#     From                     To                       Subject
P----- ------------------------ -----------------------  ----------------------
 Invalid reply chain, fixing ... U
 Invalid reply chain, fixing ... U
Message area "
" contains 
 messages.!System contains messages ranging 
Enter message number to read : 6Enter message number to start at [Enter=First/Last] :  Pause after each message [Y/n]? 
S'Mark messages for later reading [Y/n]? 'Clear currently marked messages [Y/n]? 
 Again
 Next
 Last
 Delete	Message #
 deleted
 Reply
 Enter
 Kludge toggle
 Export
 Forward	 Reply ->	 <- Reply
 Stop#Mark this message? [yes/No/stop] : 
End of messages.
Press [Enter] to continue: 
There is no message #
End of new mail
End of messagesU
%<Su!
|<Yu<
<<Su8
There are no messages in this area
1You do not have read access to this message area.	FRIMNSHQ
1[F]orward,  [R]everse,   [I]ndividual,  [H]elp,
/[M]arked,   [N]ew msgs,  [S]elected,    [Q]uit.
Select: 
Forward
Reverse
Individual
READHELP
Marked
New messages
Selected read
,Read messages according to what criteria :
+[F]rom name, [T]o name, [S]ubject, [Q]uit
To name
Enter 'To' search-string : 	From name
Enter 'From' search-string : 
Subject
Enter subject search-string : 
	"	3	K	_	i	w	
!"!'!V![!r!w!
"(":"?"I"N"m"
#/#A#F#K#a#
$*$B$Y$^$k$
%$%=%i%s%x%
&	&$&6&;&@&I&p&
','1';'@'\'a'q'v'{'
'0*V*v*{*
+$+8+H+M+U+i+y+~+
,#,B,G,f,k,
-(---B-R-d-i-n-v-
.".7.<.i.n.
/$/?/H/V/r/
#Device/filename to export file to: 
Cannot create file!
Exporting ... 
Enclosed
Subject 
 (DELETED)
 (PRIVATE)
 (RECEIVED)
   From : 
     To : 
 (KILL/SENT)
 (SENT)
 (FILE ATTACH)
 (CRASH)
 (REQ RECEIPT)
 (AUDIT REQ)
 (RETURN RECEIPT)
 on (
)	Message #
   Date : 
Replies : 
-> #U
Subject : U
	QX123456
Toggle message attributes:
[1] ... Deleted  : 
[2] ... Netmail  : 
[3] ... Private  : 
[4] ... Received : 
[5] ... Local    : 
Select attribute to toggle:
QX1234567
Toggle message attributes:
[1] ... Kill/sent   : 
[2] ... Exported    : 
[3] ... File-attach : 
[4] ... Crash       : 
[5] ... Req receipt : 
[6] ... Audit req   : 
[7] ... Ret receipt : 
Select attribute to toggle:
<1r:<7w6
To      : 
Address : U
From    : 
Address : U
 (DELETED)
 (NETMAIL)
 (PRIVATE)
 (RECEIVED)
 (LOCAL)
 (KILL/SENT)
 (SENT)
 (FILE ATTACH)
 (CRASH)
 (REQ RECEIPT)
 (AUDIT REQ)
 (RETURN RECEIPT)
 on (
)	123456XQ
SYSOP Message Adjustment Menu
[1] .. Area no.   : 
[2] .. From       : 
[3] .. To         : 
[4] .. Subject    : 
[5] .. Attributes :
[6] .. Exported   : 
[6] .. Net Attrib :
[X] .. Save and exit
[Q] .. Quit (without saving)
Select: 
New message area: #U
*<6u&
-	o	y	
TOPT 
FMPT U
	* Origin:U
Saving message to disk ... 
MSGTMP.
--- RemoteAccess 0.02
 * Origin: 
ECHOMAIL.BBS
NETMAIL.BBS	Message #
 posted in 
 area #
Subject : U
Enter the name to use : 
SYSOP
Verifying user ... 
"You can't use another user's name!$You can't use that name, try anotherU
To      : 
Sysop
Verifying ... (
That is not a valid user of this system
NOTSYSOP?
You can't post a message to SYSOP in an EchoMail conference!
Address : 
Area to forward message in:
Area to post message in:
4You are not permitted to post messages in this area.
Forwarding message
Replying to message
Posting message
 area "
Use an alias [Y/n]? 
From    : 
To      : 
 on (
Subject : 
Change anything [y/N] : 
What do you want to change?
9[T]o name, [S]ubject, or [A]bort message, [Enter]=Quit : 
To name
Subject name
Abort
Private [y/N] ? 0Delete message after sent to destination [Y/n]: *Send message with 'crash' priority [y/N]: !Attach files with message [y/N]: 
File(s) to attach: )Quote text from original message [y/N] : 
Quoting reply text ... 
MSGTMP.
 * Message originally:
     From: 
     To  : 
     Date: 
     Area: "
 * Forwarded by 
 using 
' * Replying to a message originally to ) * Replying to a message originally from 
+Error in executing external message editor.
Message aborted.
Inactivity time-out.U
~<Su=
=<Au9
	@	E	z	
 cents
Correct [Y/n]? 
NOCREDITBSorry, but you do not have sufficient credit for this destination.
Could not find node 
. [Return] to quit,H? to list zones, z:? to list nets in zone z, n/? to list nodes in net n.U
Available zonesN          Number  Zone name                          Location             Cost
Nets in zone NType      Number  Name                               Location             Cost
Nodes in net N          Number  System name                        Location             Cost
There is no zone 
There is no net U
3Sorry, nodelist help is not available at this time.U
	 	%	
..... 
Message Areas: 
----------
MESSAGES.RA
CDREIHLSQ
There is no message text!
Delete starting at line # (1-
Delete ending   at line # (1-U
There is no message text!
Enter line # to edit (1-
Message length exceeded!
	         
        
CDREIHLSQ
    [
There is no message text!*Enter line # to insert new text before (1-
There is no message text!
Enter line # to adjust (1-
Line currently reads:
Text to replace  : 
Replacement text : 
Line now reads:U
CDREIHLSQ
L     Begin your message now. Words are wrapped automatically, a blank line
&         ends the message. Maximum of 
 lines, 
 characters per line
Editor functions:  (
 lines in text)
A[D]elete,    [E]dit line,  [R]eplace text,  [I]nsert,   [H]elp,
4[C]ontinue,  [L]ist text,  [S]ave message,  [Q]uit
Select: 
Delete
Insert
EDITHELP
Continue message
List message
Replace
Are you sure [y/N] ? 
;<Qu7
	-	7	A	`	
	CONFIG.RA
 Error opening Configuration File (
CONFIG.RA)
FILES.RA
MESSAGES.RA	EVENTS.RA
PROTOCOL.RA
LIMITS.CTL
 Error opening LIMITS.CTL
 Error #( attempting to access message-base files
Error #U
	USERS.BBS
SYSINFO.BBS
MSGIDX.BBS
MSGTOIDX.BBS
MSGHDR.BBS
MSGTXT.BBS
MSGINFO.BBS
LASTCALL.BBS
LASTREAD.BBS
USERON.BBS
COMBINED.BBS
NODEIDX.RA
NODELIST.???
NODELIST.000	NODELIST.
EXITINFO.BBS
TIMELOG.BBS
 Creating user-file
! Creating new user file
 Creating message-header file
 Creating message-text file$ Rebuilding message-base index files
! Rebuilding message files
 Creating new SysInfo Files
 Rebuilding user indexesU
noneU
"Invalid choice, please try again..U
Please enter a number between 
 and 
, or [Return] to QuitU
Access password: 
	Number : 
Number entered : 
Is this correct [Y/n]? U
!	/	>	O	
	2	F	g	
 Exiting to DOS at errorlevel U
COMSPECU
\<	u*
RATEMP
RA.$:
 Unable to allocate swap space, attempting normal shell
   bytes of swap space allocated
 EXITINFO.BBS missing!
DORINFO1.DEF
PAGESTAT.RAU
Terminating Call
User off-line
.TMP'
 Executing Event : Exit at Errorlevel (
 NetMail Entered : Exit At Errorlevel 3)
 EchoMail Entered : Exit At Errorlevel 41
 Net and EchoMail Entered : Exit At Errorlevel 5%
 Exiting after caller at errorlevel U
DORINFO1.DEF
 BAUD,N,8,1U
LASTCALL.BBSU
----------  
 System Log CreatedU
.Printer out of paper, printer logging disabled*Printer off-line, printer logging disabled&Printer busy, printer logging disabled6Undetermined printer trouble, printer logging disabledU
$ < u
Efficiency 
% (	 bytes), 
 Cps.U
.000U
 Paging Options 
 Use paging hours 
 Turn paging OFF  
 Turn paging ON   
PAGESTAT.RAU
 baud
Security: 
  Time: 
 mins
[Line: 
[Graphics]
[Wants Chat]	[F9]=Help
Voice#: 
Data #: 
Last Call    : 
Times Called : 
Uploads : 
 files  
Downloads : 
 files
Flags: (A):
  (B):
  (D):
Last Caller: 
    Total System Calls : 
[Printer: 
[Local Screen: 
[Time:
Next Event : 
, errorlevel NALT: [C]hat [D] Snoop [F]lags [H]angup [J]Shell [L]ockOut [P]rinter [S]ecurityN     [T]ime [O]verride Paging  
-Inc Time 
-Dec Time     [F1]-[F4]=Extra StatsU
'<	u#
kl@+F
&;U#t
&;E!t
&;U#u
&;E!t
      U
&:E	t4
TPWINDOW/TPSCREEN conflictU